D-Link DFL-500, Руководство пользователя

Страница: 99 / 140

Enabling the URL block list
To turn on URL blocking by enabling the URL block list:
·
Go to Web Filter > URL Block .
·
Select Enable URL Block to turn on URL blocking.
The DFL-500 now blocks web pages added to the URL block list.
Changing the URL block message
To customize the message that users receive when the DFL-500 blocks web pages.
·
Go to Web Filter > URL Block .
·
Select Edit Prompt to edit the URL block message.
· Change the text of the message. You can add HTML code to this message.
·
Select OK to save your changes.
The DFL-500 will now display this message when a URL is blocked.
Adding URLs to the URL block list
To add URLs to the URL block list:
·
Go to Web Filter > URL Block .
·
Select New to add an entry to the URL block list.
· Type the URL to block.
Enter a complete URL, including path, to block access to a page on a web site. For example,
www.badsite.com/index.html
blocks access to the main page of this example website. You can
also add IP addresses, for example,
182.33.44.34/index.html
blocks access to the main web page
at this address. Do not include
http://
in the URL to block.
·
Select Enable to block the URL.
· Select OK to add the URL to the URL block list.
You can enter multiple URLs and then select Check All
to activate all of the entries in the URL block
list.
Each page of the URL block list displays 100 URLs.
· Use Page Down and Page Up to navigate through the list.
DFL-500 User Manual
99