D-Link DCS-935LH, Быстрое руководство по установке

Страница: 4 / 36

DCS-935LH
4
E
N
G
LI
S
H
PRODUCT SETUP
SeTTiNG UP YOUr Camera
Please follow the instructions below to set up your mydlink camera.
Congratulations, your DCS-935LH is now ready to use! Be sure to check the support.dlink.com
website periodically for the latest firmware updates to keep your product secure and up to date with
the latest features.
Note: If you experience issues registering this camera with your mydlink account, or if you
purchased an open box or resold unit, perform a hard reset by pressing and holding the reset button
on the device for 10 seconds while the device is powered on. If you are returning the device to
the place of purchase, please perform the hard reset procedure to clear the device of any
personal data
.
Step 1: On your mobile device, download mydlink Home by going to mydlinkhomeapp.dlink.com ,
or by searching for mydlink Home in the iTunes App Store or Google Play.
Step 2: Launch the mydlink Home app and create a new account or sign in to your existing
account.
iOS
: If you are asked about allowing the app to access your
location, select Allow .
Android : Make sure location services are turned on in your phone’s
settings.
Step 3: After logging in, tap the Settings icon in the top-left corner, select Add New Device ,
and follow the instructions.
When you are asked to scan a QR code, use the code on the Quick Install Card in your
package, or on the label attached to your device.