D-Link DCS-6620G - Network Camera, Руководство пользователя, Страница: 125 / 145

125
DCS-6620G User’s Manual
D-Link Systems, Inc.
Schedule Video Recording with Motion Detection
Schedule Video Recording with Motion
Detection
Next, run the
IP surveillance
program. Click on the
Configurations
button and select
Scheduler
.
 Check “Enable motion detection.”

Click on “New” to have a new window to monitor video.

Enter in a window name.

Adjust the “Sensitivity” and “Percentage” levels according to the local environment.
The highest sensitivity and lowest percentage provides the most sensitive setting.

After adding the motion window, click on save to enable the activity display. You can
add up to 3 motion windows to trigger recording.
To schedule video recording with motion detection, you must first enable motion detection on
the 802.11g PTZ Internet Camera. Click the
Motion Detection
button under the
Advanced
tab
from the
Configuration
screen to access settings that affect how the
DCS-6620G
802.11g PTZ
Internet Camera can serve as a security device by recording only when motion is detected.
Note: These settings can be configured in your Web browser and while logged into the
IP
surveillance
Program.
Click
Motion Detection
In this window, follow the steps below to ensure that motion detection is correctly enabled:
For detailed information about each setting, please refer to
Configuration > Advanced > Motion
Detection
in the section titled “Using the
DCS-6620G
With an Internet Browser” (page 52).