D-Link DCS-6220G, Руководство пользователя

Страница: 40 / 145

40
DCS-660G User’s Manual
D-Link Systems, Inc.
Using the DCS-660G with an Internet Browser
WLAN Configuration Settings (continued)
(Service Set Identifier) is a name that identifies your wireless network.
Access Points and wireless clients attempting to connect to a specific
WLAN (Wireless Local Area Network) must use the same SSID. The
default setting is default.
Click on the pull-down menu; select from thefollowing options:
Infrastructure – connecting the WLAN using an Access Point such
as the DWL-. (The default setting.)
Ad-Hoc – wireless mode used when connecting directly to a computer
equipped with a wireless adapter in a peer-to-peer environment (use
this setting if you do not have an Access Point).
The default wireless channel setting is channel 6. Select the channel
that is the same as the other wireless devices on your network.
Select the transmission rate on the network. Auto is the default
setting.
Select Long or Short Preamble. The Preamble defines the length of
the CRC block (Cyclic Redundancy Check is a common technique
for detecting data transmission errors) for communication between
the Access Point and the roaming wireless Network adapters. Long
Preamble is the default setting. Note: High network traffic areas
should use the shorter preamble type.
Choose one of the following modes:
None – No encryption is selected.
WEP – The user can select 64-bit or 18-bit encrytpion in HEX or
ASCII mode.
WPA-PSK – Selecting this mode will require an input of the preshared
key between the camera and the wireless device it is connected to.
Choose one of the following authorization modes:
Auto – Will automatically adjust to the Authentication mode of the
wireless client.
Shared Authentication – Allows communication only with other
devices with identical WEP settings.
Open Authentication – Communicates the key across the network.
Select the key length of 64-bits (10 characters in HEX or 5 in ASCII),
18-bits (6 characters in HEX or 13 in ASCII).
Select either HEX or ASCII.
SSID:
Wireless mode:
Channel:
TX rate:
Preamble:
Security:
Auth Mode:
Key length:
Key format:
Configuration > Advanced > Network (continued)