D-Link DCS-5211L Скачать руководство пользователя страница 27

Страница: 27 / 78

D-Link DCS-5211L/DCS-5222L User Manual

Section 4 - Configuration

Icon

Button Name

Function

Profile buttons

Use these buttons to switch between

video profiles. Refer to page 27 for more

information on setting up profiles.

Full Screen button

Displays the video at full screen.

Snapshot button

Takes a snapshot of the image currently

displayed on the screen and will save

it to a file on the hard drive in a folder

specified using the Storage folder

button.

Video recording button

Triggers the camera’s recording function.

This will record the video displayed on

the screen and will save it to a file on the

hard drive in a folder specified using the

Storage folder button.

Storage folder button

Sets the location to save snapshots and

video recordings.

Listen button

Sends the audio received from the

camera’s microphone through to the

PC’s speakers. Click again to turn off.

Talk button

Sends audio from a microphone

connected to your PC through to the

speakers connected to the camera.

Zoom buttons

Zooms in or out.

Содержание DCS-5211L















































































Результаты поиска

Содержание DCS-5211L

Отзывы:

D-Link DCS-5211L, Руководство пользователя, Страница: 27 / 78

Результаты поиска

Содержание DCS-5211L

Отзывы: