34
D-Link DCS-5030L User Manual
34
Section 3 - Configuration
Wireless Setup
Check this box to allow your camera to connect to your network
wirelessly.
Enter the network name (SSID) of the wireless network you want
to connect to. You can also click the
Site Survey
button below
to choose an available network and fill in settings automatically.
If you are using
Ad-Hoc
as your connection mode, select the
same channel that is being used by your wireless network.
Select the connection mode used by your wireless network. In
most cases, you should select
Infrastructure
.
Ad-Hoc
is only
used if your camera is directly connecting to another PC or
device without the use of a router or access point.
Clicking this button will allow you to select an available wireless
network to connect to, and will fill in the necessary settings for
you.
Select the wireless security mode used by your wireless network.
If you select WEP or WPA-PSK/WPA2-PSK, enter the password
for your wireless network in the text box that appears.
Enable
Wireless:
SSID:
Channel:
Connection
Mode:
Site Survey:
Wireless
Security
Mode:
This section allows you to set up and configure the wireless settings on your camera.
