29
D-Link DCS-4622 User Manual
Section 3: Configuration
Image Setup
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Mirror:
Flip:
Anti Flicker:
White Balance:
Exposure
Mode:
Shutter:
Denoise:
Brightness:
Contrast:
This will mirror the image horizontally.
This will flip the image vertically. When turning Flip on, you may want to
consider turning Mirror on as well.
Select the frequency used by your power lines to avoid camera flicker
or moving bars in your video. Generally, if your power outlets are 220 to
240 V, you should select 50 Hz. If your power outlets are 100 to 120 V, you
should select 60 Hz.
Use the drop-down box to change white balance settings to help balance
colors for different environments. You can choose from Auto, Outdoor,
Indoor, and Fluorescent.
Changes the exposure mode. Use the drop-down box to set the camera for
Indoor, Outdoor, or Night environments, or to Moving to capture moving
objects. The Low Noise option will focus on creating a high-quality picture
without noise. You can also create 3 different custom exposure modes. The
Max Gain setting will allow you to control the maximum amount of gain to
apply to brighten the picture.
This setting will appear if a custom Exposure Mode is selected. Set the
minimum and maximum shutter speed (in seconds) the camera will use.
Shorter shutter speeds will provide a sharper picture, but require more
available light. Longer shutter speeds will provide a brighter picture in
low-light environments, but may blur objects that are in motion.
This setting controls the amount of noise reduction that will be applied to
the picture.
Adjust this setting to compensate for backlit subjects.
Adjust this setting to alter the color intensity/strength.
