D-Link DCS-3710, Быстрое руководство по установке, Страница: 5 / 68

D-Link DCS-3710 Quick Install Guide
Hardware Installation
5
Hardware Installation
E
N
G
LI
S
H
3. Hardware Installation
Basic Connection (without PoE)
Connect the camera to your switch or router via Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable.
Note: Once power has been established, the LED will turn red. When the device has
obtained an IP address and is accessible, the LED will turn green.