manualshive.com logo in svg

D-Link DAP-2660, Руководство пользователя

Поделиться
Скачать
D-Link DAP-2660 Скачать руководство пользователя страница 76

D-Link DAP-2660 User Manual

76

Filters

This page allows the user to configure Wireless MAC ACL settings for access control. Click the 

Save

 button to accept the changes made.

Wireless Band:

Access Control List:

MAC Address:

MAC Address List:

Current Client

Information:

Upload ACL File:

Load ACL File to Local 

Hard Drive:

Select the wireless band used here. Options to 

choose from are 

2.4 GHz

 and 

5 GHz

. 

Select 

Disable

 to disable the filters function.

Select 

Accept

 to accept only those devices with 

MAC addresses in the Access Control List. All other 

devices not on the list will be rejected.

Select 

Reject

 to reject the devices with MAC 

addresses on the Access Control List. All other 

devices not on the list will be accepted.

Enter each MAC address that you wish to include 

in your filter list, and click Apply.

When you enter a MAC address, it appears in this 

list. Highlight a MAC address and click Delete to 

remove it from this list.

This table displays information about all the 

current connected stations.

Wireless MAC ACL

Here users can upload a pre-configured wireless MAC ACL settings configuration file to the access point which will overwrite 

the current wireless MAC ACL settings. Click the 

Browse

 button to navigate to the configuation file, located on the local PC, 

and then click the 

Upload

 button to initiate the upload. 

Here users can download the current wireless MAC ACL settings, in a configuration file, to the local PC, that serves as a backup 

when needed. Click the 

Download

 button and navigate to the destination where the file can be saved on the local PC.

Содержание DAP-2660













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды