DAP-1620
AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
MAC Filter
On the
Advanced / MAC Filter
page, you can configure MAC-address-based filtering for
computers of the extender's LAN.
Figure 73. The
Advanced / MAC Filter
page.
Select the needed action from the drop-down list in the
Default mode
section to configure
filtering for all devices of the extender's network:
•
Allow
: Allows access to the extender's network and to the Internet for devices (the value is
specified by default);
•
Deny
: Blocks access to the extender's network for devices.
!
You can use the
Deny
mode only if an active rule which allows access to the device's
network is created on the page.
To create a rule (specify a MAC address of a device for which the specified filtering mode will be
applied), click the
ADD
button
(
)
.
Figure 74. The window for adding a rule for the MAC filter.
Page
98
of 125