DAP-1620
AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
CHAPTER 4. CONFIGURING VIA WEB-BASED
INTERFACE
Initial Configuration Wizard
To start the Initial Configuration Wizard, go to the
Initial Configuration
section. On the opened
page, click the
OK
button and wait until the factory default settings are restored.
Figure 27. Restoring the default settings in the Wizard.
If you perform initial configuration of the extender via Wi-Fi connection, please make sure that you
are connected to the wireless network of
DAP-1620
(see the WLAN name (SSID) on the back
panel of the device) and click the
NEXT
button.
Figure 28. Checking connection to the wireless network.
Click the
START
button.
Figure 29. Starting the Wizard.
Page
37
of 125
