D-Link DAP-1533 Скачать руководство пользователя

Страница: 86 / 99

D-Link DAP-1533 User Manual

Appendix E - GNU General Public License

GPL Code Statement

This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”)

or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL

code and LGPL code used in this product, are available to you at:

http://tsd.dlink.com.tw/GPL.asp

The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more

authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.

WRITTEN.OFFER.FOR.GPL.AND.LGPL.SOURCE.CODE

Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or

traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as

allowed under the GPL and LGPL.

Please direct all inquiries to:

Email: [email protected]

Snail Mail:

Attn: GPLSOURCE REQUEST

D-Link Systems, Inc.

17595 Mt. Herrmann Street

GNU GENERAL PUBLIC LICENSE

Version 3, 29 June 2007

document, but changing it is not allowed.Fountain Valley, CA 92708

Содержание DAP-1533




































































































Результаты поиска

Содержание DAP-1533

Отзывы:

Похожие инструкции для DAP-1533

Бренды по названию

Популярные бренды

D-Link DAP-1533, Руководство пользователя

Результаты поиска

Содержание DAP-1533

Отзывы:

Похожие инструкции для DAP-1533

Бренды по названию

Популярные бренды