D-Link DAP-1533, Руководство пользователя

Страница: 53 / 99

53 D-Link DAP-1533 User Manual
Section 3 - Configuration
Device Name:
LAN Connection
Type:
IPv4 Address:
Subnet Mask:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
My IPv6
Connection:
Enter the Device Name of the AP and click
Next
to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
Use the drop-down menu to select
Static.IP
if
your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. Select
Dynamic.IP.(DHCP)
to automatically assign an
IP address to the computers on the LAN/private
network.
Enter the IPv4 address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the primary DNS server IP address.
Enter the secondary DNS server IP address.
Select the mode you would like the router to use to
connect to the IPv6 Internet from the drop-down
menu.
This section will allow you to change the local network settings of the bridge and to configure the Static settings.
LAN Settings
Static