D-Link DAP-1533, Руководство пользователя

Страница: 50 / 99

50 D-Link DAP-1533 User Manual
Section 3 - Configuration
Wireless Setup
2.4 GHz
Wireless Type:
Wireless
Network
Name:
Wireless
Band:
Wireless
Mode:
Wireless
Channel:
Channel
Width:
Select Infrastructure or Ad-Hoc from the drop-down
menu.
When you are browsing for available wireless
networks, this is the name that will appear in the list
(unless Visibility Status is set to Invisible, see below).
This name is also referred to as the SSID. For security
purposes, it is highly recommended to change from
the pre-configured network name.
Displays 2.4GHz.
Choose the wireless mode you would like to use.
The Auto Channel Scan setting can be selected to
allow the DAP-1533 to choose the channel with the
least amount of interference.
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Wireless
MAC Clone:
Enable:
MAC
Address:
This feature allows you to clone the wireless MAC address to connect the device.
Select to enable Wireless Mac Clone.
Enter the desired MAC address connected to your bridge to enable the clone function.