Technical Support Setup Procedure
Page | 1
How to configure DAP-1330 as Access Point with non-default
wireless SSID?
(Note: Please ensure the device LED is blinking orange colour before you do
setup.
If it is not blinking in orange colour, follow the guide on page 3 on how to reset
the device before follow the guide to setup.)
Step 1:
Copy down the wireless name and password that was on the sticker of the device.
Step 2:
Plug
DAP-1330
direct to power outlet.
Step 3:
Click on the
Computer Icon
on the right bottom side of the Windows. Select the
Wireless
network name
that was copy down.
Step 4:
Enter the
Wifi Password
which had copy down earlier on. Click on
OK.
