D-Link DAP-1260L, Руководство пользователя

Страница: 43 / 103

43 D-Link DAP-1260L User Manual
Section 3 - Configuration
Device Name:
LAN Connection
Type:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
Enter the Device Name of the AP. It recommended
to change the Device Name if there is more than
one D-Link device within the subnet. You can enter
the device name of the AP into your web browser to
access the instead of IP address for configuration. If
you are using the device name to connect, ensure
that your PC and your DAP-1260L are on the same
network.
Select Static IP from the drop-down menu.
Enter the IP address of the access point. The default
IP address is 192.168.0.50. If you change the IP
address, once you click
Apply
, you will need to enter
the new IP address in your browser to get back into
the configuration utility.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the Primary DNS Server assigned by your ISP.
Enter the Secondary DNS Server (if there is one)
assigned by your ISP.
Static IP
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP
address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields
must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Access point will not accept the IP
address if it is not in this format.