DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
Flow Control
On the
Advanced / Flow Control
page, you can enable and disable data flow control for the
WAN port of the access point.
This function is used for equal load balancing in ISPs' networks. Contact your ISP to clarify if this
function needs to be enabled.
Figure 102. The
Advanced / Flow Control
page.
To enable the flow control function, select the
Enabled
checkbox and click the
Apply
button.
To disable the flow control function, deselect the
Enabled
checkbox and click the
Apply
button.
Page
130
of 158