26
D-Link COVR-P2502 User Manual
Section 3 - Configuration
Advanced
QoS Engine
This
Quality of Service (QoS) Engine
will allow you to prioritize particular
clients over others, so that those clients receive higher bandwidth. For
example, if one client is streaming a movie and another is downloading a
non-urgent file, you might wish to assign the former device to a higher priority
than the latter so that the movie streaming is not disrupted by the traffic of
the other devices on the network.
In the Advanced menu on the bar on the top of the page, click
QoS Engine
.
Under
Connected Clients
, you will see device cards representing each
connected client. If some are off-screen, you can use the
<
and
>
buttons to
scroll through the cards.
A maximum of
one
device can be assigned
Highest
priority.
A maximum of
one
device can be assigned
High
priority.
A maximum of
two
devices can be assigned
Medium
priority.
If no devices are explicitly assigned with any priority, they will all be treated
with equal priority. If some devices are not assigned with any priority and
others are, the unassigned devices will be treated a devices with the lowest
priority.
To assign a priority level to a device, drag the device card from the Connected
Clients list over an empty slot and release the mouse button. The card will
remain in the slot. If you want to remove a priority assignment from a device
and return it to the Connected Clients list, click the cross (
x
) in the top right of
the device card.
Click
Save
when you are done.
