DIR-842V2
AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Page
116
IPv6
Go to the
IPv6
tab to change or add the IPv6 address of the router, configure IPv6 addresses
assignment settings, specify MAC address and IPv6 address pairs, or add own DNS records.
Figure 104. Configuring the local interface. The
IPv6
tab. The
Local IPv6 Address
section.
To add an IPv6 address of the router, click the
ADD
button ( ). To change the IPv6 address of
the router, select it in the table.
Figure 105. Configuring the local interface. The
IPv6
tab. The window for adding an IPv6 address.
In the opened window, you can specify the following parameters:
Parameter
Description
Local IPv6 Address
IPv6 address
The IPv6 address of the router in the local subnet.
Prefix
The length of the prefix subnet.
Gateway IPv6 address
Available if the
Access point
or
Repeater
mode was selected in
the Setup Wizard.
The gateway IPv6 address which is used by the router to connect to
the Internet (e.g., for synchronizing the system time with an NTP
server).
Optional
.
Click the
APPLY
button.
To remove the IPv6 address, select it in the table and click the
DELETE
button in the opened
window. Then click the
APPLY
button.
