5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
272
Enable trace function for the packet trace feature.
debug packet-trace
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
sFlow Commands
sFlow monitors high-speed switch and routed networks to give complete visibility into network activity,
enabling effective management and control of network resources.
5-173 sflow receiver
Configure the following sFlow: owner string, receiver timeout, max datagram size, IP address, and port.
No
command sets the sFlow collector parameters to defaults.
Note:
This command configures a receiver as a nontimeout entry. Unlike entries configured with a
specific timeout value, this command is persistent and available in show running-config. As a nontimeout
entry, the related sampler and pollers information is persistent and available in the running-config.
sflow receiver rcvr_idx {owner owner-string {timeout rcvr_timeout | notimeout} | max-datagram
size | ip ip | port port}
no sflow receiver indx {ip ip-address | maxdatagram size | owner string timeout interval | port 14-
port}
Parameters
rcvr_idx
owner owner-string
The identity string (sFlowRcvrTable) for the receiver, range: 127
characters (default: null string). An empty string indicates an unclaimed
entry and the configuration is set to default values. An entity wishing to
claim an sFlowRcvrTable entry must ensure that the entry is unclaimed
before trying to claim it. Before assigning a receiver to a sampler/poller,
the entry must be first claimed, set owner string to non-null value.
Содержание 5000 Series
Страница 1: ...Draft 1 2 1 ...
Страница 141: ...5000 Series Layer 2 3 Managed Data Center Switch CLI Reference Guide 135 ...
