23
Use to choose the audio output settings of the Blu-ray player.
•
HDMI digital: use to set the sound decoding
•
Bitstream: sends the undecoded audio to the amplifier
•
PCM: decodes the signal and sends it to the amplifier (not supplied)
•
Re-encode: encodes and sends the audio
•
Down sampling: use to change the data rate.
•
Dolby DRC: use to activate or deactivate Dolby DRC (uncompressed audio format).
•
DRC: use to choose a dynamic sound mode.
2. Speaker settings
•
Configuration: use to adjust the audio system.
•
Test audio: use to test the audio system.
Press the "Setup" key to display the setup menu. Press "Setup" again to leave the menu.
Press
► three times to access system information.
In the sub-menu, press
"
◄ ►▼▲"
to select the desired option then the "OK" key to confirm. The
system can be configured to your own preferences.
Displays the Blu-ray system information (the information in the above image is given as an example
only).
SYSTEM INFORMATION
