7
Manual de Colgado
/
event series
/
Rigging Manual
ARRAY MOUNTING OF GROUPS OF 4 UNITS ON A FLATBED DOLLY
Groups of three or four units are easy to transport by truck.
We will see in this section the assembly of a system array with groups of four units.
The first group with 4 units will be the superior
group, that is to say, the group where we will install
the correspondent
AX
(AX-EV208
for
EVENT-208A
units and
AX-EV210
for
EVENT-210A
units).
To assemble the correspondent
AX
, we will lift
the hidden front and rear rods on both sides, we
will proceed similarly as we have seen in the
previous section.
The result is shown in the right figure.
Now, we will assemble the lateral pieces (the
pieces of
AX
with the silkscreen visible from the
side). We will insert the security pins as shown
down.
Warning: Verify the correct installation of
the security pins. These pins will support the
inferior load.
