3
EN / CZone® Meter Interface (MI) User & Installation Manual
2 GENERAL INFORMATION
USE OF THIS MANUAL
Copyright © 2019 BEP Marine. All rights reserved.
Reproduction, transfer, distribution, or storage of part or all of the
contents in this document in any form without the prior written permission of BEP Marine is prohibited.
This manual
serves as a guideline for the safe and effective operation, maintenance and possible correction of minor malfunctions
of the Meter Interface Module (MI)
.
This manual is valid for th
e following:
Description
Part number
CZONE METER INTERFACE c/w SEAL & PLUG
80-911-0005-00
CZONE METER INTERFACE NO SEAL & PLUG
80-911-0006-00
It is obligatory that every person who works on or with the Meter Interface is completely familiar with the contents of this
manual, and that he/she carefully follows the instructions contained herein.
Installation of, and work on the Meter Interface, may be carried out only by qualified, authorized, and trained personnel,
consistent with the locally applicable standards and taking into consideration the safety guidelines and measures. Please
keep this manual in a secure place!
GUARANTEE SPECIFICATIONS
BEP Marine guarantees that this unit has been built according to the legally applicable standards and specifications.
Should work take place which is not in accordance with the guidelines, instructions and specifications contained in this
Installation manual, then damage may occur and/or the unit may not fulfil its specifications. All these matters may mean
that the guarantee becomes invalid.
QUALITY
During their production and prior to their delivery, all our units are extensively tested and inspected. The standard
guarantee period is two years.
VALIDITY OF THIS MANUAL
All the specifications, provisions and instructions contained in this manual apply solely to standard versions of the Meter
Interface (MI)
delivered by BEP Marine.
LIABILITY
BEP can accept no liability for:
•
Consequential damage due to use of the Meter Interface. Possible errors in the manuals and the results thereof.
CAREFUL!
Never remove the identification label
Important technical information required for service and maintenance can be derived from the type number plate.
CHANGES TO THE METER INTERFACE (MI)
Changes to the Meter Interface may be carried out only after obtaining the written permission of BEP.
