Cytron Technologies UC00A, Руководство пользователя

Страница: 9 / 21

​ ROBOT . HEAD to TOE
​
Product User’s Manual – ​ UC00A
5.0 PRODUCT SPECIFICATION
UC00A is designed to ease serial communication between microcontroller and PC. The
specifications are as listed below:
5.1 6 ways header socket
Label Definition Function
DTR
UC00A Data Terminal
Ready pin In Arduino compatible board, this pin is use for
auto-reset.
RXI
UC00A’s UART
Receive pin This is UC00A receiver pin. It should be connected to
device’s transmitter pin.
TXO
UC00A’s UART
Transmit pin This is UC00A transmitter pin. It should be connected
to device’s receiver pin.
VCC
3.3V or 5V power
output from UC00A
Power output from UC00A to connect to
microcontroller or external devices. The optional power
output is 3.3V or 5V. If 5V is selected at Vsel slide
switch, this pin will supply 5V, and vice versa for 3.3V.
CTS
UC00A’s Clear To
Send pin
Hardware Hand-shaking pin.
GND Ground or negative
Ground of power and signal. This pin should be
connected to device’s GND pin.
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
9