2.2
Labels
Introduction
This section describes the system label and other safety or regulatory labels that are
attached to Sterile Tube Fuser - Dry and Hot Lips Tube Sealer.
System label
The system label is located on the back of the equipment. The system label identifies
the equipment and shows electrical data, regulatory compliance, and warning
symbols.
Description of symbols on the system
label
The following symbols and text may be present on the system label:
Symbol/text
Meaning
Code no
Instrument assembly number
Serial no
Instrument serial number
Mfg Year
Year (YYYY) and month (MM) of manufacture
Voltage
Frequency
Max Power
Max Current
Fuse
Electrical requirements:
•
Voltage (VAC
)
•
Frequency (Hz)
•
Max. power (VA)
•
Max. current (A)
•
Fuse rating
Warning! Read the user documentation before using the
system. Do not open any covers or replace parts unless
specifically stated in the user documentation.
2 Safety instructions
2.2 Labels
Sterile Tube Fuser - Dry and Hot Lips Tube Sealer Operating Instructions 28964139 AG
19
