2.2
Symbols and abbreviations
Introduction
This section describes the information on the system label and other safety or regula-
tory labels that are attached to the product.
System label
The system label is located on the back of the equipment. The system label identifies
the equipment and shows electrical data, regulatory compliance, and warning
symbols.
System label description
The following symbols may be found on the system label.
Symbol/text
Meaning
Sterile Tube
Fuser - Wet
Name of product
29004170
Catalogue number
Code no
Instrument assembly number
Serial no
Instrument serial number
Mfg Year
Year (YYYY) and month (MM) of manufacture
Voltage
Frequency
Max Power
Max Current
Fuse
Electrical requirements:
•
Voltage (VAC
)
•
Frequency (Hz)
•
Max. power (VA)
•
Max. current (A)
•
Fuse rating
Warning! Read the user documentation before using the
system. Do not open any covers or replace parts unless
specifically stated in the user documentation.
This symbol indicates that the waste of electrical and elec-
tronic equipment must not be disposed as unsorted munic-
ipal waste and must be collected separately. Please contact
an authorized representative of the manufacturer for infor-
mation concerning the decommissioning of equipment.
2 Safety instructions
2.2 Symbols and abbreviations
20
Sterile Tube Fuser - Wet Operating Instructions 29024010 AD
