cytiva AKTA go, Руководство по эксплуатации

Страница: 120 / 130

8.3.4 Regulations for North America
Introduction
This section describes the information that applies to the product in the USA and
Canada.
NRTL certification
This symbol indicates that the Amersham ImageQuant 800 has been certified by a
Nationally Recognized Testing Laboratory (NRTL).
NRTL means an organization, which is recognized by the US Occupational Safety and
Health Administration (OSHA) as meeting the legal requirements of Title 29 of the
Code of Federal Regulations (29 CFR), Part 1910.7.
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause unde-
sired operation.
Note: The user is cautioned that any changes or modifications not expressly
approved by Cytiva could void the user’s authority to operate the equip-
ment.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
CAN ICES/NMB compliance
This product complies with the Canadian standard ICES-003/NMB-003 concerning
electromagnetic compatibility.
8 Reference information
8.3 Regulatory information
8.3.4 Regulations for North America
120 Amersham ImageQuant 800 Operating Instructions 29372604 AC