Cypress S6J3110 Series, Как пользоваться инструкцией, Страница: 24 / 27

How to Use A/D Converter for S6J3110/ S6J3120 Series
www.cypress.com
Document No. 002-04457 Rev. *B 24
4.12 Range Comparison Flag Register (ADRCIF)
The Range Comparison Flag Register (ADRCIF) shows interrupt factors for continuous detection of range
comparison results.
Table 14. Range Comparison Flag Register Example of Settings
Bit Bit name Description
Setting register
Value Contents
31-0 RCINT[31-0] Conversion Data Error Flag Bits 0,1
Range comparison interrupt
factor are clear (0) or
generation status (1).
Note: The RCINT bit is read-only. The RCINT bit is cleared to "0" by writing "1" in the ADRCIFC Register RCINTC bit.
4.13 Range Comparison Flag Clear Register (ADRCIFC)
The Range Comparison Flag Clear Register (ADRCIFC) clears the bits in the range comparison flag register.
Table 15. Range Comparison Flag Clear Register Example of Settings
Bit Bit name Description
Setting register
Value Contents
31-0 RCINTC[31-0] RCINT Clear Bits 1
Clear the ADRCIF
Register RCINT bit