Cypress PSoC CY8CPROTO-063-BLE страница 12 Скачать руководство пользователя

Страница: 12 / 41

PSoC® 6 BLE Prototyping Board Guide, Doc. # 002-24993 Rev. **

Introduction

1.3

Getting Started

This guide will help you get acquainted with the CY8CPROTO-063-BLE PSoC 6 BLE Prototyping
Board:

■

The

Software Installation chapter on page 15

describes the installation of the required software to

operate this kit. This includes the installation of the PSoC Creator IDE, Peripheral Driver Library
(PDL) and CySmart for development and debugging the applications, and PSoC Programmer for
programming the

.hex

files.

■

The

Kit Operation chapter on page 17

describes the major features of the CY8CPROTO-063-

BLE PSoC 6 BLE Prototyping Board and functionalities such as programming, debugging, and
the USB-UART and USB-I2C bridges.

■

The

Code Examples chapter on page 22

describes how to easily adapt a code example that was

originally developed for PSoC 6 BLE Pioneer Kit (CY8CKIT-062-BLE).

■

The

Appendix on page 26

describes the hardware content of the kit and the hardware operation,

details about programming the kit using MiniProg3, Kit Schematics, and the bill of materials
(BOM).

1.4

Additional Learning Resources

Cypress provides a wealth of data at

www.cypress.com

to help you to select the right PSoC device

for your design, and to help you to quickly and effectively integrate the device into your design. For a
comprehensive list of resources, see

How to Design with PSoC 6 MCU - KBA223067

. The following

is an abbreviated list for PSoC 6 MCU:

■

Overview:

PSoC Portfolio

and

PSoC Roadmap

■

Product Selectors:

PSoC 6 MCU Product Selector

. In addition,

PSoC Creator

includes a device

selection tool.

■

Datasheets: Describe and provide electrical specifications for the

PSoC 61

PSoC 62

PSoC 63

devices and

CYBLE-416045-02 EZ-BLE Creator Module

■

CapSense Design Guide

: Learn how to design capacitive touch-sensing applications with the

PSoC 6 MCU and PSoC 4 family of devices.

■

Application Notes

and

Code Examples

: Cover a broad range of topics, from basic to advanced.

Many of the application notes include code examples. Visit the

PSoC 6 MCU Code Examples

web page

for a list of all available PSoC Creator code examples. To access code examples from

within PSoC Creator, see

PSoC Creator Code Examples on page 10

■

Technical Reference Manuals (TRM)

: Provide detailed descriptions of the architecture and

registers in each PSoC 6 MCU family.

■

Development Kits

❐

PSoC 6 BLE Pioneer Kit (CY8CKIT-062-BLE)

and

PSoC 6 WiFi-BT Pioneer Kit

(CY8CKIT-062-WiFi-BT)

are easy-to use and inexpensive development platforms. These kits

include connectors for Arduino™ compatible shields and Digilent Pmod Peripheral Modules.

❐

PSoC 6 BLE Prototyping Kit (CY8CPROTO-063-BLE)

are very low-cost prototyping platform

for sampling PSoC 6 MCU.

❐

CY8CKIT-001

is a common development platform for all PSoC family devices.

❐

The

MiniProg3

device provides an interface for flash programming and debug.

Note:

MiniProg3 is not required to use kits such as CY8CPROTO-063-BLE that have

KitProg2 provided on-board.

■

Knowledge Base Articles (KBA)

: Provide design and application tips from experts on using the

device.

Содержание PSoC CY8CPROTO-063-BLE










































Результаты поиска

Содержание PSoC CY8CPROTO-063-BLE

Отзывы:

Похожие инструкции для PSoC CY8CPROTO-063-BLE

Бренды по названию

Популярные бренды

Cypress PSoC CY8CPROTO-063-BLE, Быстрый старт

Результаты поиска

Содержание PSoC CY8CPROTO-063-BLE

Отзывы:

Похожие инструкции для PSoC CY8CPROTO-063-BLE

Бренды по названию

Популярные бренды