PSoC™ 6 Wi-Fi Bluetooth® pioneer kit guide, Document Number. 002-22677 Rev. *I
5
Safety and regulatory compliance
information
Regulatory compliance information
Contains transmitter module FCC ID: VPYLB1DX and IC: 772C-LB1DX
This kit is intended to use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR
EVALUATION PURPOSES ONLY and is not considered by Cypress Semiconductor to be a finished
end-product fit for general consumer use. It generates, uses, and can radiate radio-frequency
energy and has not been tested for compliance with the limits of computing devices pursuant to part
15 of FCC or ICES-003 rules, which are designed to provide reasonable protection against radio-
frequency interference. Operation of the equipment may cause interference with radio
communications, in which case users at their own expense will be required to take whatever
measures may be required to correct this interference.
The kit contains
certified module from Murata. Due to change in the
antenna pattern/type and gain used in this kit, Class II permissive changes are required to recertify
this kit. The radiated emission tests must be performed again to obtain a new FCC ID for this host
kit. Most conducted RF test results may still be reused. Customer also needs to take their product
through other FCC/ISED testing such as unintentional radiators (FCC sub part 15B) and any other
required regional product certifications including but not limited to EU directives. See
Regulatory Certification Guide
by Murata on information on pre-certified and reference certified
module concepts and information on what additional test are required for FCC certification.
Customer should consult a Telecommunication Certification Body (TCB) lab for guidance on other
requirements for the device certification.
For details on the Type 1DX module from Murata, see
https://wireless.murata.com/type-1dx.html
.
This kit contains electrostatic discharge (ESD)-sensitive devices.
Electrostatic charges readily accumulate on the human body and any
equipment, and can discharge without detection. Permanent damage
may occur on devices subjected to high-energy discharges. Proper
ESD precautions are recommended to avoid performance degradation
or loss of functionality. Store unused kits in the protective shipping
package.
End-of-Life/Product Recycling
The end-of life for this kit is five years from the date of manufacture
mentioned as a bar code on the back of the kit box. Contact your
nearest recycler for information on discarding the kit.
