GALEP-Programmer
FR Family MB91460 Series, Flash Programming, Doc. No. 002-05153 Rev. *A
27
5.2
GALEP-5
GALEP-
5 Programmer is a third party tool developed by ‘Conitec’ (www.conitec.com).
This programmer allows parallel as well as serial programming of several Cypress microcontrollers.
In case of parallel programming, different socket-adapters are available, depending on the microcontroller family
and device package.
In case of serial programming both synchronous and asynchronous modes are supported. For serial
programming an optional ISP-adapter is offered.
The GALEP-5 is a PC-controlled programmer using USB connection. It can be powered by USB port or by an
external power-supply, but also by accumulators (6x Type AAA NiMh 1.2V).
Figure 5-10: Conitec GALEP-5 Programmer
Software used together with the GALEP-5 programmer is GALEP5. This software supports all programming
modes available for the adequate device.
Figure 5-11: GALEP-5 programmer software
5.2.1
Parallel Programming with GALEP-5 Programmer
The GALEP-5 programmer includes a 48-pin Textool
TM
-socket, for devices with Dual-Inline-Packages (DIP). For
other packages optional adapters are available, e.g.:
Table 5-3: Parallel Programming Adapters
Package
GALEP-Adapter
Remark
QFP208
210881
MB91F465D, MB91F467D
LQPF100
210882
MB91F464A, MB91F465X
LQFP120
210883
MB91F465K
BGA256
210884
MB91F469G
LQFP64
210889
MB91F463N
LQFP144
210890
MB91F465B, MB91F467B
LQFP176
210891
MB91F467R
LQFP144
210892
MB91F465C, MB91F467C
