Cypress FR Flash Programmer
FR Family MB91460 Series, Flash Programming, Doc. No. 002-05153 Rev. *A
18
4.1
Full Operation
Full Operation is the easiest way to use this programmer software. You only have to select the target
microcontroller device (e.g. “MB91F467D”) and the mhx-file you want to program to the embedded flash
memory.
Figure 4-2. Cypress FR Flash Programmer Full Operation 1
Press button “Full Operation”. A new window pops up which gives the order to reset the microcontroller. Reset
the MCU and the software starts the sequences of the programming progress. In case of a blank chip,
processing is performed in order of
Download
,
Blank Check
, and
Program & Verify
. When it is not a blank chip,
processing is performed in order of
Download
,
Blank Check
,
Erase
,
Blank Check
, and then
Program & Verify
.
The actual status can be seen on the progress bars.
Figure 4-3. Cypress FR Flash Programmer Full Operation 2