CYBLE-224116-01
EZ-BLE™ PSoC
®
XT/XR BT 4.2 Module
Cypress Semiconductor Corporation
198 Champion Court
San Jose
,
CA 95134-1709
408-943-2600
Document Number: 002-12524 Rev. *D
Revised December 27, 2017
General Description
The Cypress CYBLE-224116-01 is a fully certified and qualified
module supporting Bluetooth
Low Energy (BLE) wireless
communication. The CYBLE-224116-01 is a turnkey solution
that includes onboard power amplifier (PA), low noise amplifier
(LNA), crystal oscillators, chip antenna, passive components,
and the Cypress PSoC
4 BLE. Refer to the PSoC 4 BLE
datasheet
for additional details on the capabilities of the
PSoC 4 BLE device used on this module.
The EZ-BLE™ PSoC XT/XR module provides extended
industrial temperature operation (XT) as well as extended
communication range (XR). The EZ-BLE XT/XR module is a
scalable and reconfigurable platform architecture, combining
programmable and reconfigurable analog and digital blocks with
flexible automatic routing. The CYBLE-224116-01 also includes
digital programmable logic, high-performance analog-to-digital
conversion (ADC), opamps with comparator mode, and standard
communication and timing peripherals. The CYBLE-224116-01
includes a royalty-free BLE stack compatible with Bluetooth 4.2.
Module Description
■
Module size: 9.5 mm ×15.4 mm × 1.80 mm (with shield)
❐
Drop-in compatible with
CYBLE-224110-00
(XT/XR 4.1)
■
Extended Range:
❐
Up to 400 meters bidirectional communication
[1, 2]
❐
Up to 450 meters in beacon only mode
[1]
■
Extended industrial temperature range: –40 °C to +105 °C
■
Up to 25 GPIOs
■
256-KB flash memory, 32-KB SRAM memory
■
Bluetooth 4.2 qualified single-mode module
❐
QDID:
88953
❐
Declaration ID:
D032784
■
Certified to FCC, CE, MIC, KC, and IC regulations
■
32-bit processor (0.9 DMIPS/MHz) operating at up to 48 MHz
■
Watchdog timer with dedicated internal low-speed oscillator
Power Consumption
■
TX output power: –18 dBm to +9.5 dBm
■
RX Receive Sensitivity: –95 dBm
■
Received signal strength indicator (RSSI) with 1-dB resolution
■
1 Second connection interval with PA/LNA active: 26.3 µA
■
TX current consumption:
❐
BLE silicon: 15.6 mA (radio only, 0 dBm)
❐
SE2438T: 20 mA (PA/LNA only, +9.5 dBm)
■
RX current consumption of 16.4 mA (radio only)
❐
BLE silicon: 16.4 mA (radio only)
❐
SE2438T: 5.5 mA (PA/LNA only)
■
Low power mode support
❐
Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
❐
Hibernate: 150 nA with SRAM retention
❐
Stop: 60 nA with XRES wakeup
Integrated PA/LNA
■
Supports output power up to +9.5 dBm and RX
S
of –95 dBm
Programmable Analog
■
Four opamps with reconfigurable high-drive external and
high-bandwidth internal drive, comparator modes, and ADC
input buffering capability; can operate in Deep-Sleep mode
■
12-bit, 1-Msps SAR ADC with differential and single-ended
modes; channel sequencer with signal averaging
■
Two current DACs (IDACs) for general-purpose or capacitive
sensing applications on any pin
■
One low-power comparator that operate in Deep-Sleep mode
Programmable Digital
■
Four programmable logic blocks called universal digital blocks,
(UDBs), each with eight macrocells and datapath
■
Cypress-provided peripheral Component library, user-defined
state machines, and Verilog input
Capacitive Sensing
■
Cypress CapSense Sigma-Delta (CSD) provides best-in-class
SNR (> 5:1) and liquid tolerance
Segment LCD Drive
■
LCD drive supported on all GPIOs (common or segment)
■
Operates in Deep-Sleep mode with four bits per pin memory
Serial Communication
■
Two independent runtime reconfigurable serial communication
blocks (SCBs) with I
2
C, SPI, or UART functionality
Timing and Pulse-Width Modulation
■
Four 16-bit timer, counter, pulse-width modulator (TCPWM)
blocks
■
Center-aligned, Edge, and Pseudo-random modes
Up to 25 Programmable GPIOs
■
Any GPIO pin can be CapSense, LCD, analog, or digital
■
Two overvoltage-tolerant (OVT) pins; drive modes, strengths,
and slew rates are programmable
Notes
1. Connection range tested module-to-module in full line-of-sight environment, free of obstacles or interference sources with output power of +9.5 dBm.
2. Specified as EZ-BLE XT/XR module to module range. Mobile phone connection will decrease based on the PA/LNA performance of the mobile phone used.
Downloaded from
