Cypress CYW9P62S1-43438EVB-01, Руководство пользователя, Страница: 6 / 46

CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. ** 6
1. Introduction
Thank you for your interest in the CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit. The
PSoC 62S1 Wi-Fi BT Pioneer Kit enables you to evaluate and develop your applications using the
PSoC 62 Series MCU (hereafter called “PSoC 6 MCU”) and CYW43438 Wi-Fi/BT combo device .
PSoC 6 MCU is Cypress’ latest, ultra-low-power PSoC specifically designed for wearables and IoT
products. PSoC 6 MCU is a true programmable embedded system-on-chip, integrating a 150-MHz
Arm
®
Cortex
®
-M4 as the primary application processor, a 100-MHz Arm Cortex-M0+ that supports
low-power operations, up to 2 MB Flash and 1 MB SRAM, CapSense
®
touch-sensing, and
programmable analog and digital peripherals that allow higher flexibility, in-field tuning of the design,
and faster time-to-market. The PSoC 6 MCU on this kit, CY8C6247BZI-D54 has 1 MB Flash and
288 KB SRAM.
The PSoC 62S1 Wi-Fi BT Pioneer Board offers compatibility with Arduino™ shields. The board
features a PSoC 6 MCU, and a CYW43438 Wi-Fi/Bluetooth combo module. Cypress CYW43438 is
a highly integrated single-chip solution and offers the lowest BOM in the industry for smartphones,
tablets, and a wide range of other portable devices. The chip includes a 2.4 GHz WLAN IEEE 802.11
b/g/n MAC/baseband/radio, and Bluetooth 4.2. The WLAN section supports SDIO interface to the
host MCU (PSoC 6 MCU), and the Bluetooth section supports high-speed 4-wire UART interface to
the host MCU. In addition, the board features an onboard programmer/debugger (KitProg3), a 512-
Mbit Quad SPI NOR flash, a 4-Mbit Quad SPI F-RAM, a micro-B connector for USB device interface,
a 5-segment CapSense slider, two CapSense buttons, an RGB LED, two user LEDs, one
potentiometer, and two push buttons.
You can use ModusToolbox™ to develop and debug your PSoC 6 MCU projects. ModusToolbox
software is a set of tools that enable you to integrate Cypress devices into your existing development
methodology.
If you are new to PSoC 6 MCU and ModusToolbox IDE, refer to the application note AN228571 -
Getting Started with PSoC 6 MCU on ModusToolbox to help you familiarize with the PSoC 6 MCU
and help you create your own design using the ModusToolbox IDE.