CY8CKIT-042-BLE-A QUICK START GUIDE
B
LUETOOTH
®
LOW
ENERGY
PIONEER KIT
• Insert the 3-V coin cell (included with the kit)
into the coin cell holder on the rear side of
the baseboard
• Connect the dongle to your computer's USB port.
This demo does not require installing the drivers
for Windows 8 or earlier versions. Refer to Kit
Guide
for Windows 8.1 or later
• Press the button SW2 on both the dongle and the
baseboard. The red LED on the baseboard and
the blue LED on the dongle will stay on for three
seconds before turning off, indicating a Bluetooth
low energy connection between the two boards
1
• Move your finger over the CapSense
®
slider on
the baseboard to control the brightness of the
blue LED on the dongle
2
3
4
1
2
3
4
5
7
6
1 BLE Pioneer Baseboard preloaded with
CY8CKIT-143A PSoC
®
4 BLE 256KB Module
2 CY5677 CySmart BLE 4.2 USB Dongle
(BLE Dongle)
3 Two proximity sensor wires (5 inches each)
4 Four Jumper Wires (4 inches each)
5 Coin cell (3V CR2032)
6 USB Standard-A to Mini-B cable
7 Quick Start Guide (this document)
