Cypress CY8CKIT-025, Руководство пользователя

Страница: 33 / 86

CY8CKIT-025 PSoC® Precision Analog Temperature Sensor Expansion Board Kit Guide, Doc. # 001-65791 Rev. *J 33
Example Projects
Figure 5-4. Simultaneous Temperature Display for All Six Sensors
5.2.2 Project Operation
5.2.2.1 Hardware Connections
The kit includes example projects for the CY8CKIT-001 DVK, CY8CKIT-030 DVK, and CY8CKIT-050
DVK hardware platforms. The pin mapping for CY8CKIT-030 and CY8CKIT-050 are identical; follow
the instructions provided for CY8CKIT-030 PSoC 3 DVK for CY8CKIT-050 PSoC 5LP DVK as well.
The main difference between the examples for the CY8CKIT-001 and CY8CKIT-030 platforms is the
PSoC pin mapping. The project provided for the CY8CKIT-001 PSoC DVK can be used with both
PSoC 3 and PSoC 5LP. See
Migrating Projects to use with CY8CKIT-050 and CY8CKIT-010 on
page 31 for more details.
5.2.2.1.1 CY8CKIT-030 PSoC DVK
1. Plug the PSoC Precision Analog Temperature Sensor EBK to port E of the CY8CKIT-030 DVK.
2. No jumper wires are required for the PSoC 3 DVK examples because the mechanical buttons are
hard-wired to GPIOs. Ensure that the LCD included with the PSoC 3 DVK is attached.
3. Set VDDD and VDDA to 3.3 V using J10 and J11.
4. In the CY8CKIT-025 EBK, choose appropriate jumper settings for internal sensors; see the Kit
Operation chapter on page 18 .
Note
: When using the CY8CKIT-025 EBK with CY8CKIT-050 PSoC 5LP DVK, remove the jumpers
from J43 and J44 on PSoC 5LP DVK.
Thermocouple Thermistor
RTD Diode1 Diode2
IC