Cypress CY8C20xx7/S CapSense Series Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 75

Cypress CY8C20xx7/S CapSense Series Скачать руководство пользователя страница 74

Resources

CY8C20xx7/S CapSense

®

Design Guide

Doc. No. 001-78329 Rev. *E

74

9.6 PSoC Programmer

PSoC Programmer

is a flexible, integrated programming application for programming PSoC devices. It can be used

with PSoC Designer and PSoC Creator

™ to program any design onto a PSoC device.

PSoC Programmer includes a hardware layer with APIs to design specific applications using the programmers and
bridge devices. The PSoC Programmer hardware layer is fully detailed in the COM guide documentation as well as
example code across the following languages: C#, C, Perl, and Python.

9.7 CapSense Data Viewing Tools

Many times during CapSense design, you will want to monitor relevant CapSense data (raw counts, baseline,
difference counts, and so on) for tuning and debugging purposes. Application note

– CapSense Data

gives information to help you identify and use the right tools for CapSense data viewing and logging.

9.8 PSoC Designer

Cypress offers an exclusive integrated design environment (IDE),

. With PSoC Designer, you can

configure analog and digital blocks, develop firmware, and tune your design. Applications are developed in a drag-
and-drop design environment using a library of fully characterized analog and digital functions, including CapSense.
PSoC Designer comes with a built-in C compiler and an embedded programmer. A pro compiler is available for
complex designs.

9.9 Code Examples

Cypress offers a large collection of code examples to get your design up and running fast.



CapSense Controller Code Examples Design Guide

9.10 Design Support

Cypress has a variety of design support channels to ensure the success of your CapSense solutions.



Knowledge Base Articles

– Refer to technical articles by product family or perform a search on various

CapSense topics.



CapSense Application Notes

– Refer to a wide variety of application notes built on information presented in this

document.



– Learn about advanced capacitive-touch interface topics.



Cypress Developer Community

– Connect with the Cypress technical community and exchange information.



CapSense Product Selector Guide

– See the complete product offering of Cypress‟s CapSense product line.



– Quickly get up to speed with tutorial videos



Quality & Reliability

– Cypress is committed to complete customer satisfaction. At our Quality website you can

find reliability and product qualification reports.



Technical Support

– World class technical support is available online.

«
...
72
73
74
75
»

Содержание CY8C20xx7/S CapSense Series












































































Отзывы:

Нет отзывов