© 2021 Cypress Solutions
Complete Manual: CTM-200 R2 (Revision 1.3)
27
Configuring the CTM-200
6.5
Wi-Fi Networks
Wi-Fi configuration is accessed by the “Wi-Fi Access Point” or “Wi-Fi Client” select button on the left of the Web
GUI
Wi-Fi support is based on 2.4 GHz IEEE 802.11 b/g/n technology. Access Point and Client configurations are
supported with standard features such as SSID, Channel, WEP/WPA/WPA2/PSK/PSK2/TKIP Encryption, key and
RADIUS server support. EAP PEAP/TTLS and RADIUS authentication is also supported.
If Wi-Fi is configured as an Access Point the wireless connection is available by default at
192.168.1.1
.
The Wi-Fi can be un-bridged from LAN0 interface if you wish to have the WLAN on its own subnet, for example,
192.168.0.1/24
Default Wi-Fi configuration is to have the Wi-Fi configured as an access point. Default SSID is
CTM200-XX:XX
where
XX:XX
are the last 4 digits of the CTM-200 mac address, for example: CTM200-02:9B
and the default password
is
CypressAccess
.
There are two modes of operation for Wi-Fi, Access Point or AP provides connectivity to connected devices.
Client mode uses another AP to provide connectivity for the CTM-200:
6.5.1
Access Point
CTM-200 serves as an internet access point to other Wi-Fi enabled devices, up to 7 devices can be connected to
the CTM-200 Wi-Fi access point at any one time.
