CY3280-MBR2 CapSense Express with SmartSense Auto-Tuning Kit Guide, Doc. # 001-71857 Rev. *C
13
3.
Kit Operation
The CY8CMBR2110 CapSense controller supports multiple features. The CY3280-MBR2 CapSense
Express Kit package includes the hardware required to demonstrate these features. This chapter
details these features along with how to use them with the kit.
To start using the kit, open the case using the screw driver and insert the two AAA batteries in the
battery holder. Assemble the case using the screw driver provided with the kit. Touch the power
button first and ensure the power button, LED1, and LED2 light up. Each CapSense button is
mapped to an LED such that activation of a button can be verified by monitoring the LED status. The
ON status of LEDs indicate that the CapSense buttons are active.
The Flex-PCB with 10 buttons can be connected to the kit via the 44-pin expansion connector (see
for details). Power off the kit before connecting the Flex-PCB. When
the kit is powered, a finger touch on the Flex-PCB buttons lights up the respective LED on the kit.
Figure 3-1. CY8CMBR2110 CapSense Controller Kit with Flex-PCB
Содержание CapSense Express SmartSense CY3280-MBR2
Страница 8: ...8 CY3280 MBR2 CapSense Express with SmartSense Auto Tuning Kit Guide Doc 001 71857 Rev C Introduction ...
Страница 44: ...44 CY3280 MBR2 CapSense Express with SmartSense Auto Tuning Kit Guide Doc 001 71857 Rev C A 2 3 Power Layer ...
Страница 45: ...CY3280 MBR2 CapSense Express with SmartSense Auto Tuning Kit Guide Doc 001 71857 Rev C 45 A 2 4 Ground Layer ...
