Cypress Semiconductor CY8CKIT-062-WiFi-BT, Руководство пользователя, Страница: 51 / 86

PSoC 6 WiFi-BT Pioneer Kit Guide, Doc. # 002-22677 Rev. *B 51
Kit Hardware
11. Audio Jack Selection Switch (SW1) : This on-board selection switch can set the headphone
type either to AHJ and OMTP standard connected to the audio jack.
Table 4-3. TFT Shield Pinout
Pin # Arduino Pin
Arduino
Function
TFT Shield Function
Pioneer Board
Connection
J1.1 VIN VIN NC VIN
J1.2 GND GND GND GND
J1.3 GND GND GND GND
J1.4 5 V 5 V NC 5 V
J1.5 3.3 V 3.3 V VCC 3.3V 3.3 V
J1.6 RESET RESET NC SWD RESET
J1.7 I/O REF I/O REF VIO REF P6 VDD
J1.8 -- -- NC NC
J2.1 A0 ADC0 ALS OUT P10[0]
J2.2 -- -- TFT DISP DB8 P9[0]
J2.3 A1 ADC1 Codec PDN SW P10[1]
J2.4 -- -- TFT DISP DB9 P9[1]
J2.5 A2 ADC2 IMU INT1 P10[2]
J2.6 -- -- TFT DISP DB10 P9[2]
J2.7 A3 ADC3 IMU INT2 P10[3]
J2.8 -- -- NC P9[3]
J2.9 A4
ADC4 / SDA
(I2C)
PDM CLK P10[4]
J2.10 -- -- TFT DISP DB11
P9[4]
a
J2.11 A5 ADC5 PDM DATA P10[5]
J2.12 -- -- TFT DISP DB12 P9[5]
J3.1 D8 DIGITAL I/O TFT DISP DB14 P13[0]
J3.2 D9 PWM TFT DISP DB15 P13[1]
J3.3 D10 SS/PWM TFT DISP RD_L P12[3]
J3.4 D11 MOSI/PWM TFT DISP WR_L P12[0]
J3.5 D12 MISO TFT DISP D/C P12[1]
J3.6 D13 SCK TFT DISP RST_L P12[2]
J3.7 GND GND GND GND
J3.8 AREF analog ref i/p NC VREF
J3.9 SDA SDA I2C SDA (IMU and audio codec) P6[1]
J3.10 SCL SCL I2C SCL (IMU and audio codec) P6[0]
J4.1 D0 RX I2S MCLK P5[0]
J4.2 D1 TX I2S TX SCK P5[1]
J4.3 D2 DIGITAL I/O I2S TX WS P5[2]
J4.4 D3 PWM, I/O I2S TX SDO P5[3]
J4.5 D4 DIGITAL I/O I2S RX SCK P5[4]
J4.6 D5 PWM, I/O I2S RX WS P5[5]
J4.7 D6 PWM, I/O I2S RX SDI P5[6]