PSoC 6 WiFi-BT Pioneer Kit Guide, Doc. # 002-22677 Rev. *B
5
Safety Information
Regulatory Compliance
The CY8CKIT-062-WiFi-BT PSoC 6 WiFi-BT Pioneer Kit is intended for use as a development
platform for hardware or software in a laboratory environment. The board is an open-system design,
which does not include a shielded enclosure. This may cause interference to other electrical or
electronic devices in close proximity. In a domestic environment, this product may cause radio
interference. In such cases, you may be required to take adequate preventive measures. In addition,
this board should not be used near any medical equipment or RF devices.
Attaching additional wiring to this product or modifying the product operation from the factory default
may affect its performance and cause interference with other apparatus in the immediate vicinity. If
such interference is detected, suitable mitigating measures should be taken.
General Safety Instructions
ESD Protection
ESD can damage boards and associated components. Cypress recommends that you perform
procedures only at an ESD workstation. If an ESD workstation is unavailable, use appropriate ESD
protection by wearing an anti-static wrist strap attached to a grounded metal object.
Handling Boards
The PSoC 6 WiFi-BT Pioneer Kit is sensitive to ESD. Hold the board only by its edges. After
removing the board from its box, place it on a grounded, static-free surface. Use a conductive foam
pad, if available. Do not slide the board over any surface.
The PSoC 6 WiFi-BT Pioneer Kit contains electrostatic discharge (ESD) sensitive
devices. Electrostatic charges readily accumulate on the human body and any
equipment, and can discharge without detection. Permanent damage may occur on
devices subjected to high-energy discharges. Proper ESD precautions are
recommended to avoid performance degradation or loss of functionality. Store unused
PSoC 6 WiFi-BT Pioneer Kits in the protective shipping package.
End-of-Life/Product Recycling
The end-of life for this kit is five years from the date of manufacture mentioned
as a bar code on the back of the kit box. Contact your nearest recycler for
information on discarding the kit.
Содержание CY8CKIT-062-WiFi-BT
Страница 44: ...PSoC 6 WiFi BT Pioneer Kit Guide Doc 002 22677 Rev B 44 Kit Hardware Figure 4 5 Pioneer Board Pinout...
Страница 63: ...PSoC 6 WiFi BT Pioneer Kit Guide Doc 002 22677 Rev B 63 Figure A 4 Schematics of Power Supply System...
Страница 72: ...PSoC 6 WiFi BT Pioneer Kit Guide Doc 002 22677 Rev B 72...