Cypress Semiconductor CY3215-DK, Руководство пользователя

Страница: 25 / 38

CY3215-DK PSoC 1 In-Circuit Emulator Development Kit Guide, Doc. # 001-66514 Rev. *B 24
Using ICE-Cube Connector
3.2.4.4 Trace
The Trace window is displayed when Debug > Windows > Trace is chosen. It displays a continu-
ous, configurable listing of project symbols and operations from the last breakpoint. The trace shows
symbolic, rather than address data, to enhance readability.
Each time the program executes, the trace buffer is cleared. When the trace buffer becomes full, it
continues to operate and overwrite old data.
Figure 3-19. Trace Window
3.2.4.5 Locals
A separate window is available for local variables. Whenever execution halts, the local variables are
updated to the current value.
Figure 3-20. Locals Window
WARNING: The time taken to execute a system supervisory call (SSC) such as FlashRead/Write,
Table Read, and Erase Block is significantly more while emulating a code through ICE-Cube when
compared to the time taken when running the code on chip.