Cypress Semiconductor CapSense CY8CKIT-024 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 29

Cypress Semiconductor CapSense CY8CKIT-024 Скачать руководство пользователя страница 8

Introduction

CY8CKIT-024 CapSense

®

Proximity Shield Kit Guide, Doc. No. 001-92568 Rev. *B

8

1.2.2 Hardware Requirements

plugs into any Arduino

™ hardware-compatible development platforms from Cypress.

provides

example projects targeting the

CY8CKIT-040 PSoC 4000 Pioneer Development Kit

and

CY8CKIT-042 PSoC

and

show how the

kit connects to the

and

kits

respectively.

Figure 1-2: CY8CKIT-024 Connected to CY8CKIT-040

Figure 1-3: CY8CKIT-024 Connected to CY8CKIT-042

You can purchase the

kit from

http://www.cypress.com/CY8CKIT-040

and the

kit from

http://www.cypress.com/CY8CKIT-042

1.2.3 Software Requirements

The

kit does not have any programmable/configurable device onboard, so it does not need any software for

configuration. However, the PSoC device present on baseboards, such as

or

, requires

firmware, which you can develop with the

PSoC Creator IDE

(Version 3.0 SP1 or later).

1.2.3.1 PSoC Creator

allows concurrent hardware and application firmware design of PSoC 3, PSoC 4, and PSoC 5LP systems.

PSoC systems are designed using classic, familiar, schematic-capture technology supported by pre-verified, production-
ready PSoC Components

™.

PSoC Components are analog and digital virtual chips represented by icons that you can drag and drop into a design and
configure  to  suit  a  broad  array  of  application  requirements.  You  can  configure  each  Component  in  the  rich,  mixed-signal
Cypress  Component  Catalog  with  the  Component  Customizer  tool.  These  Components  include  a  full  set  of  dynamically
generated API libraries. After you have configured the PSoC system, you can write, compile, and debug the firmware within
PSoC Creator, or export the firmware to other IDEs such as those from IAR, Keil, and Eclipse.

You can download the latest version of the PSoC Creator software from

http://www.cypress.com/psoccreator

. Refer to the

for the minimum and recommended system requirements.

«
...
6
7
8
9
10
...
»

Содержание CapSense CY8CKIT-024






























Отзывы:

Нет отзывов