CYP CHDBT-1H7CE, Руководство по эксплуатации, Страница: 7 / 16

2
4. SYSTEM REQUIREMENTS
• HDMI equipped source devices, connect with HDMI cables
• HDMI equipped displays (TVs or monitors) or HDMI equipped AV
receivers, connect with HDMI cables
• Certified CAT5e/6/7 cables
• HDBaseT™ Receivers (e.g. CH-507RX or CH-1109RX)
5. FEATURES
• HDMI with 4K×2K resolution and 3D support, HDCP and DVI compliant
• Simultaneous HDMI and CAT5e/6/7 outputs
• Supports one HDTV and seven CAT5e/6/7 outputs
• Supports data rate from 300 Mbps up to 3 Gbps
• Supports a wide range of PC resolutions from VGA to WUXGA
(RB) and HDTV resolutions up to 4K×2K (3840×2160@30 Hz and
4096×2160@24 Hz)
• Supports transmission of High Definition audio: LPCM 7.1CH, Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master Audio (32 kHz~192 kHz
sample rate)
• Supports distances up to 100 meters over CAT5e/6/7 cables
• Supports Ethernet network rates up to 100Mbps
• Supports PoE with compatible Receiver units
• Supports selection of Standard or TV EDID settings
• Supports control of devices via 2-way IR
• 3D signal display is dependent on the TV/Display’s EDID settings
Not
e:
1. This system was tested with CAT6/23AWG cables, results may vary
with cables of a different specification.
2. The PoE function is designed for powering compatible Receiver
units only, non-PoE Receivers will need their own power supply.
Receivers of another brand may not be compatible.
3. For playback of 4k×2k HDMI source signals, a 4K×2K capable
display and High Spee d HDMI cables are required.