CYP CH-2537TXWPUS страница 4 Скачать руководство пользователя

Страница: 4 / 44

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this

equipment:
•

Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

•

To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

REVISION HISTORY

VERSION NO.

DATE

SUMMARY OF CHANGE

RDV1

22/06/18

Preliminary release

VS1

04/07/18

Final technical review

Содержание CH-2537TXWPUS













































Результаты поиска

Содержание CH-2537TXWPUS

Отзывы:

Похожие инструкции для CH-2537TXWPUS

Бренды по названию

Популярные бренды

CYP CH-2537TXWPUS, Инструкции по эксплуатации

Результаты поиска

Содержание CH-2537TXWPUS

Отзывы:

Похожие инструкции для CH-2537TXWPUS

Бренды по названию

Популярные бренды