CYP CH-2527RXPL, Руководство по эксплуатации

Страница: 10 / 24

5
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter's Front Panel
LINK VGA HDMI POWER
UHD WALLPLATE EXTENDER
HDMI VGA SERVICE
IN IN
IN
AUTO
ADJUST
IN
SEL
7
1 2 3 4 5 6
8 9 10
1
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2
HDMI IN LED: This LED will illuminate when HDMI is the selected
source.
3
VGA IN LED: This LED will illuminate when VGA is the selected
source.
4
LINK LED: This LED will illuminate solid when both Transmitter and
Receiver are connected and communicating with each other
properly.
5
IN SEL: Press this button to switch between the available inputs. The
LED will illuminate to indicate which source is currently selected.
6
AUTO ADJUST: Press this button to optimize the positioning of the
picture (VGA sources only).
Note: Pressing and holding the Auto Adjust button for 5 seconds
while the HDMI input is selected will reset the unit to its factory
defaults.
7
SERVICE: This slot is reserved for firmware update use only.
8 HDMI IN: Connect to HDMI source equipment such as a media