CynkoMet T-149, Инструкция по использованию и эксплуатации

Страница: 88 / 148

Cynko Met
T-149
88
7. Transport
The trailer is prepared for sale in a fully assembled state
and does not require packing. Only technical - physical
documentation of the machine and the cable connection of
the electrical system are subject to packing, and as to the
optional accessories: the warning triangle, tarpaulin with a
frame and plate distinguishing slow-moving vehicles.
The supply of the trailer to the user is done by
independent transport after connecting with the tractor or
automobile (in this case, the trailer because of the height can
be mounted on the platform of the transport mean on the
hubs - with unscrewed and taken off wheels or on wheels, but
with disassembled and folded upper extensions
Loading and unloading a trailer from a car should be
carried out using the loading ramp with a tractor or using a
crane or lever. During operation, observe the general safety
rules with handling operations. Persons operating the
reloading equipment must have the required permissions to
use these devices.
When loading / unloading using the tractor, the trailer
must be properly connected with the tractor according to the
requirements contained in this manual. The trailer braking
system must be running and tested before running off or
driving on the ramp.
When loading / unloading the trailer by crane or lever
to lift, lift it with the help of approved fasteners designed to
carry the load with sufficient capacity. The belts must be in
good condition, they cannot show any signs of damage.
The belts should be placed under the lower frame of
the trailer in such places that when lifting the trailer the belts