CynkoMet T-149, Инструкция по использованию и эксплуатации

Страница: 18 / 148

Cynko Met
T-149
18

Repair work on the tires and wheels should be performed by
trained personnel and using appropriate tools.
 After each installation of a wheel, tighten the nuts after the
first 10 working hours, then every 50 working hours to check
their screwing.

The air pressure is to be checked regularly. Observe the
recommended air pressure.
 Dismantling the wheels can be carried out only in the case
when the trailer is not loaded.

Avoid damaged road surface, quick and variable maneuvers
and high speed during turns.

Tire valves are to be protected with caps to prevent
penetration of impurities.
3.5 The pneumatic and hydraulic system

The hydraulic and pneumatic installations during operation are
under high pressure.

Regularly check the technical condition of the connections and
the hydraulic and pneumatic systems. Oil leaks and air leaks
are unacceptable.
 The shut-off valve in the hydraulic system of the lift limits the
angle of the load crate declination when tilting it sideways and
backwards. The length of the cable controlling that valve is set
by the manufacturer and may not be adjusted during use of
the trailer.
 In case of failure of the hydraulic or pneumatic installation, the
trailer should be out of operation until failure removal.

When connecting the hydraulic hoses to the tractor, pay
attention that the hydraulic system of the tractor and the