CynkoMet N-235 Series, Инструкция по использованию и эксплуатации

Страница: 62 / 124

Cynko Met
N-233
62
In case of insufficient effect of tension, this action should be repeated
shortening the chain by another 2 links. The chains must be shortened in
pairs by the same number of links.
Shortening should be done with extreme care while maintaining compliance
with basic occupational health and safety rules and using personal
protective equipment.
NOTE!
NOTE!
It is essential before each use to check the tension of the chains
and their technical condition (the thickness of the links, whether
the links have visible damage)
6.9 Handling electrical equipment.
The work connected with the repair, replacement or regeneration of
electrical components should be entrusted to specialized workshops, which
have the appropriate technology and qualifications for this type of work.
The duties of the user include only:
•
technical inspection of the electrical installation and reflectors.
•
replacing light bulbs.
NOTE!
NOTE!
Driving with a faulty lighting system is prohibited. Damaged
shades, and burned-out bulbs must be replaced immediately
before driving. Lost or damaged reflective lights must be
replaced with new ones.
6.10 Lubrication.
Lubrication of the spreader is to be performed at the points listed in
table 9, shown in figure 14.