CYKLOP GL 205, Руководство пользователя, Страница: 39 / 139

38 EN
To be checked Adjustment and/or lubrication
Compression pressure, etc. for top
plate (applicable only if the ma-
chine is tted with a top plate). The compression pressure on the top plate is preset to approx. 280 N. If the
compression pressure increases, the shaft and bearings must be cleaned. Ad-
just sensors. 6 months
To be checked Adjustment and/or lubrication Range
Film roll brake
X
Y
Check the friction brake by pulling on the lm at normal lm speed and then
suddenly releasing the lm. The roll of lm should then stop after approx. 1/5
of a revolution.
Basic setting: Screw down the nut (
X
) until the spring washer (
Y
) is fully
compressed. Then unscrew the nut (
X
) by ¾ turn.
3 months
To be checked Adjustment and/or lubrication Range
Tensioning of chain for driving of
board, horseshoe machine. The machine with a horseshoe board has two chains for board operation. The
longer one (
[
) is self-adjusting, while the shorter one (
\
) should be checked.
See above (for standard machine) how adjustment is to take place.
3 months
(for the rst
time, after 3
weeks)
To be checked Adjustment and/or lubrication Range
Chain tensioner of top plate (appli-
cable to machines with a top plate).
X
Y
Undo the U-shaped pro le from the front of the top plate mast and check the
chain tension. The chain is tensioned by rst undoing the nut (
Y
), then undo-
ing or tightening the nut (
X
). Finish by tightening the nut (
Y
).
Clean the chain and lubricate with oil.
3 months
(for the rst
time, after 3
weeks)
To be checked Adjustment and/or lubrication Range
Mast and chain.
Clean the chain
X
and lubricate with oil.
3 months
\
[
Apply a lubricant spray
with a pipe. Avoid lubri-
cating any parts other
than the intended ones!
Apply a lubricant spray
with a pipe. Avoid lubri-
cating any parts other
than the intended ones!
Apply a lubricant spray
with a pipe. Avoid lubri-
cating any parts other
than the intended ones!